PUPE01
Product details:
| Name: | SUP electric air pump |
| Model: | PUPE01 |
| Material: | ABS+ PA |
| Input voltage: | 12V |
| Power: | 110 w |
| Hose length: | 116cm |
| Maximum atmospheric pressure: | 20PSI |
| Rated air flow: | 70L/min |
| Weight: | 1.5 kg |
| Size: | 25 x17x15cm |
| Carton size: | 27 x19x17cm/pc |
| Usage scale: | surfboard/paddle board, and most inflatable products. |
Precautions for use:
1. All power supplies must be 12V dc
2. Do not block the air inlet at the bottom of the pump, and make sure the air inlet is unobstructed at all times.
3. When the hose is damaged, do not operate this product, please replace the hose immediately.
4. Pls do not pull out the hose when inflating, because high pressure gases may harm your body.
5. Do not keep the pump working for more than 20 minutes, motor overheating may cause internal damage. Please cool down for 30 minutes after the air pump has been working continuously for 20 minutes. Do not use under high heat exposure!
6. If any parts are damaged, please do not use the pump, please contact a professional for repair.
7. This product shall not be drenched by rain or immersed in water.
8. To avoid danger, the air pump should not be aimed at the face or body when working.
9. Please do not leave the product in use.
Product details:
| Name: | SUP electric air pump |
| Model: | PUPE01 |
| Material: | ABS+ PA |
| Input voltage: | 12V |
| Power: | 110 w |
| Hose length: | 116cm |
| Maximum atmospheric pressure: | 20PSI |
| Rated air flow: | 70L/min |
| Weight: | 1.5 kg |
| Size: | 25 x17x15cm |
| Carton size: | 27 x19x17cm/pc |
| Usage scale: | surfboard/paddle board, and most inflatable products. |
Precautions for use:
1. All power supplies must be 12V dc
2. Do not block the air inlet at the bottom of the pump, and make sure the air inlet is unobstructed at all times.
3. When the hose is damaged, do not operate this product, please replace the hose immediately.
4. Pls do not pull out the hose when inflating, because high pressure gases may harm your body.
5. Do not keep the pump working for more than 20 minutes, motor overheating may cause internal damage. Please cool down for 30 minutes after the air pump has been working continuously for 20 minutes. Do not use under high heat exposure!
6. If any parts are damaged, please do not use the pump, please contact a professional for repair.
7. This product shall not be drenched by rain or immersed in water.
8. To avoid danger, the air pump should not be aimed at the face or body when working.
9. Please do not leave the product in use.
